Whirlpool RF350PXP Use And Care Manual page 10

4. Put food in the oven. Note:
Oven
5. When baking is done, turn both
racks, wails and door will be
the Oven Temperature Control
hot. and the Oven Selector to OFF
During baking, the elements will turn on and off to keep the oven temperature
at the setting. The Oven Signal Light will turn on and off with the elements.
The top element helps heat during baking, but does not turn red.
Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature
of your old oven may have shifted gradually without your noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But when
comparing to your old oven, the new design may give you different results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they con be adjusted by following these steps:
1.
Pull the Oven Temperature
Control straight off.
I I
3.
To lower the temperature,
move
a notch closer to LO. Each notch
equals aboutlO"F (X2).
10
2. Loosen the locking screws inside
the control knob. Note the
posi-
tion of the notches.
4.
To raise the temperature,
move a
notch closer to HI. Each notch
equals aboutlO"F (5°C).
Tighten the locking screw and
replace the control knob.