Fluke Ti20 Quick Start page 2

 Pressing LEVEL will allow you to adjust level higher or
lower (Fig 3).
 Pressing SPAN to adjust span wider or narrower (Fig 4).
7. PAUSE IMAGE:
The LCD will display the "Image Captured" message. (If this is not an image you desire to save, abort the save by
pulling the trigger again and return to a live image.)
8. SAVE IMAGE:
To save an image, pause the image as above.

The new menu will now give you the options to SAVE [F1] or CANCEL [F2]. Simply push the [F1] button to save
the displayed image.
9. PALETTE:
To change color palettes press the [F2] button until the menu above the [F3] button says PALETTE.

Push [F3], then [F1] or [F3] to scroll through the different color palette choices.
10. EMISSIVITY:
Press the [F2] button until [

Press the [F1] button. Emissivity will be displayed in red.

Press [F1] to increase emissivity or [F3] to lower
emissivity.
11. BACKGROUND (RTC):

Press the [F3] button. RTC will be displayed in red.

Press [F1] to toggle RTC on/off. (Fig6)

Press [F3] to Adjust.

Press [F1] to increase RTC or [F3] to lower RTC.
IFOV =2.7 mRad (Theoretical with 128x96 Detector and standard lens)
© 2011 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT / 05641 / 800.636.9820 / www.thesnellgroup.com
Pause or freeze the image by momentarily pulling the green Trigger in front of the pistol grip.
ε
Press the [F2] button until [RTC] is displayed on the lower right side if the LCD.(fig5)
QuickStart:
Fig 3
Fig 4
] is displayed on the lower left side if the LCD (Fig 5).
Fig 5
Fig 6
FLUKE Ti20
DONE
DONE
ε MENU
RTC DONE
DONE
Detect 1in. target @ 30ft.
FLUKE Ti20 Page 2
RTC
ADJUST