Memory Manager - LG KU380 Manual

Settings
]
The maximum number of times you
may enter the PUK code is 10. (Note:
If you enter an incorrect PUK code 10
times, the USIM card will be blocked
and must be replaced.)
] If the PIN code request cannot be
disabled by operator settings, you will
not be able to choose this menu item.
Handset lock
You can lock your phone. The following
4 lock functions are available.
When switching on: Locks the
handset whenever the handset is
switched on.
If USIM changed: Locks the handset
when the phone's USIM card has been
changed.
Immediate: Locks the handset
immediately.
None: Deactivates the lock function.
You are requested to enter the security
code to confirm the selection.
To unlock the handset, you need to
]
enter the security code.
54
Change codes
You can change the PIN, PIN2, and the
mobile phone password.
Note
Three incorrect PIN code entries in the
PIN code entry window would invalidate
the PIN code. In this case, you have to
enter the PUK (PIN Unblock Key) code
to configure the PIN code again. The
maximum number of times you may enter
the PUK code is 10. (Note: If you enter
an incorrect PUK code10 times, the
USIM card will be blocked and must be
replaced.)

Memory manager

Handset common memory
This function shows the status of the
user memory of the mobile phone.
Since this function scans the overall file
system for statistics, a few seconds are
required.
Handset reserved memory
This function shows the status of the
User reserved memory. The usual
contents are Text msg, Contacts,
Calendar, To do, Memo, Alarm, Call
Menu 7.8