Telefunken TF-1506 Instruction Manual page 5

Instruction manual
Radio operation
Tuner operations
• Press button to turn the radio on or off.
• Adjust the program by pressing
TUNE- or /TUNE+ buttons. Press and hold
these buttons to automatically scan to the next
radio station with strong signal.
• Use VOLUME UP/DOWN buttons to adjust
volume level.
• To obtain better FM signal reception,
extend the FM wire antenna to its full length.
Radio presets
• Press button to turn the radio on.
• Use the
buttons to select the desired radio station.
• Press and hold the MEM/M+ button;
"P01" will blink in the display.
• Use the
to select the desired preset station (P01-P10)
• Press the MEM/M+ button again to set
the preset.
• Repeat steps 2 through 5 to set more
presets.
• The unit can store up to 10 stations.
• When "P01-P10" is blinking, press the
/TUNE- or
preset number.
• When recalling preset stations, press
MEM/M+ button to select the
preset number.
4
5
/TUNE- or /TUNE+
/TUNE- or /TUNE+ button
/TUNE+ button to select the
Sleep to music
• In Radio mode, press SNOOZE/SLEEP
button to turn on sleep mode. The default sleep
time of 90 minutes will be set. Press this button
repeatedly to decrease the countdown by 10
minutes. The figures will blink on
the display for 5 seconds. The radio will turn off
automatically after the preset time period
elapses.
• To cancel the sleep function, press
button.
Alarm operation
Setting the alarm
• Press either ALARM 1 or ALARM 2
buttons. The alarm time will start to flash.
• Press the << TUNE DOWN / HOUR button
to increase the HOUR. You can press and hold the
button to increase the number quickly.
• Press the >> TUNE UP / MIN button
to increase the MINUTES. You can press and hold
the button to increase the number quickly.
• Press either ALARM 1 or ALARM 2
buttons again to select between the buzzer and
radio alarm signals.
• Once the alarm is set press the ALARM 1 or
ALARM 2 button respectively to confirm the
setting.
• In normal mode, press ALARM 1 or
ALARM 2 buttons to show the alarm settings.
• In normal mode, press and hold ALARM 1
or ALARM 2 buttons to set the desired alarm.
Alarm signal selection
When setting the alarm signal you can select
buzzer or radio (last radio station will be on).
Snooze control
• When the alarm time comes, the signal will
sound for 30 minutes if no button is pressed.
After that the sound will mute and start at the
same time the following day.
• When the alarm is on, press SNOOZE/
SLEEP button to interrupt the alarm signal.
After 9 minutes the alarm will be on again.
• If you want to stop the alarm, press
button. The alarm will resume in 24 hours.