Hummer H-120 ARGB Manual page 4

C
comes from previous page
Clean the CPU surface and apply a
thin layer of thermal grease onto
the surface.
Intel mounting: LGA2066 / 2011 installation
A B
3
Thread the LGA20XX standoff into the Clean the CPU surface and apply a
mounting holes on the motherboard. thin layer of thermal grease onto
the surface.
AMD mounting
D
8
5
Put the pump onto the CPU. Secure the
block using the tightening nuts.
C
8
5
Put the pump onto the CPU. Secure the
block using the tightening nuts.
AMD bracket mounting
Align the arrows on the bracket and the pump
base, turn the bracket clockwise to secure it to
the pump base.
* AMD bracket is universal for
TR4 / AM4 / FM2(+) / FM1 / AM3(+) / AM2(+)
AMD mounting: AM4 / FM2(+) / FM1 / AM3(+) / AM2(+) installation
A B
9
10
Choose the right mounting holes Put the washer onto the long screws
according to CPU Socket. Insert the first, and then fasten the knurled
long screws through the backplate and threaded nuts into the screws.
then through the motherboard.
C
Clean the CPU surface and apply a
thin layer of thermal grease onto
the surface.
AMD mounting: TR4 installation
A B
4
Thread the TR4 standoff into the Clean the CPU surface and apply a
mounting holes on the motherboard. thin layer of thermal grease onto
the surface.
7
6
D
8
5
Put the pump onto the CPU. Secure the
block using the tightening nuts.
C
8
5
Put the pump onto the CPU. Secure the
block using the tightening nuts.