Polycom SoundPoint IP Series Quick Start Manual page 8

For North America
For North America
For Europe
For Australia
For FED
If you are having trouble flashing your device with these URLs, please contact your technical support team
for assistance.
Notes:
●
Use the * key to enter periods (requires a single key press in any key mode)
17. Press the Ok soft key
18. Press Back/Left twice to reach the Save Config screen
19. Press the "Yes" soft key to begin the reboot sequence
Once the boot process has completed, the device will be provisioned for use in the BroadSoft BroadCloud PBX network. If the
station assignment process was properly completed prior to the reboot, the device will boot into a station specific
assigned/usable state. If not, the device will boot into a default unassigned/unusable state, and will remain in this state until
the site administrator has completed the station assignment process. If this occurs, contact your site administrator and
request that station assignment be completed for the device in question.
BroadSoft BroadCloud PBX
Polycom SoundPoint/SoundStation/VVX IP
Manual Reconfiguration Procedure
https://polycom.sipflash.com
OLDER DEVICES -
https://plcm.sipflash.com
NEWER DEVICES -
- https://polycom.broadcloud.eu
All DEVICES
- https://polycom.broadcloud.com.au
All DEVICES
- https://polycom.broadcloudgov.us
All DEVICES
Series
07/19/2017