Table of Contents
Advertisement
Quick Links
Kit Contents: K1 - K9
K1.2
K1.4
K5
K6
K9
New
Description
K1
Cold Weather Heater Assembly
K1.1
Heater / Positive Terminal - Red
K1.2
Heater / Ground Terminal - Black
K1.3
Heater / Thermostat
K1.4
Heater / Foil Backed Tape
K2
Spacers (2x)
K3
Screws (2x)
K4
Cable Ties (5x)
K5
"Y" Wire - Red
K6
"Y" Wire - Black
K7
Short Wire - Red
K8
Long Wire - Red
K9
Long Wire - Black
This kit is for many models. Your refrig-
NOTICE
erator model will not use all of the parts
in this kit.
Tools Needed:
■ 1/4 Inch Nut Driver
■ 6 inch Needle Nose Pliers
■ Refrigerator Service Manual
This procedure is to be performed by
WARNING
!
authorized service personnel only. Im-
ATTENTION
proper installation, adjustment, alteration,
service or maintenance can cause injury
or property damage.
P.O. Box 1285
Ann Arbor, MI 48106
www.norcold.com
N7, N8, and N10 Cold Weather Heater Retrofit
K4
NOR000841A
Questions 1-800-543-1219
K3
K2
K1.3
K7
K1
K8
Fig. 1
1
639971
Service Kit
K1.1
Part No. 639970A (12.03.2018)
Advertisement
Table of Contents
Related Manuals for Norcold N7
Summary of Contents for Norcold N7
- Page 1 P.O. Box 1285 639971 Service Kit Ann Arbor, MI 48106 www.norcold.com N7, N8, and N10 Cold Weather Heater Retrofit Kit Contents: K1 - K9 K1.2 K1.4 K1.3 NOR000841A Fig. 1 K1.1 Description Cold Weather Heater Assembly K1.1 Heater / Positive Terminal - Red K1.2...
-
Page 2: Connect Wiring
Install Part Connect Wiring Determine the content of the auxiliary wiring circuit of the refrigerator: • If the refrigerator has neither a fan or an ice maker, go to “Cold Weather Heater Only.” Refer to Fig. 3. • If the refrigerator has only a fan, go “Cold Weather Heater and Fan.” Refer to Fig. - Page 3 Cold Weather Heater and Fan Cold Weather Heater and Ice Maker 11 10 9 5 4 3 8 7 6 11 10 9 8 7 6 5 4 3 K1.2 K1.2 K1.1 K1.1 Fig. 5 Fig. 4 Ref. Description Ref. Description K1.1 Heater / Positive Terminal - Red...
- Page 4 Cold Weather Heater, Fan, and Ice Maker 11 10 9 8 7 6 5 4 3 Fig. 6 Ref. Description “Y” Wire - Red “Y” Wire - Black Ice Maker Water Valve Heater Wire Ice Maker Water Valve Heater Wire Not Included - Reference only 1.
-
Page 5: Contenu De L'ensemble
Ann Arbor, MI 48106 www.norcold.com Ensemble de remplacement de l’élément chauffant Juego de renovación de calentador para pour temps froid N7, N8 et N10 clima frío N7, N8 y N10 Contenu de l’ensemble : K1 - K9 Contenido del juego K1 - K9 Consulte la Fig. - Page 6 Installation de la pièce Instale la pieza Consultez la Fig. 2. Consulte la Fig. 2. Nouvelle pièce Réf. Description Pieza nueva Ref. Descripción K1.3 Élément chauffant/thermostat K1.3 Calentador / termostato K1.4 Élément chauffant/ruban à endos d’aluminium K1.4 Calentador / cinta adhesiva con respaldo metalizado Cales d’espacement (2x) Separadores (2x) Vis (2x)
- Page 7 Élément chauffant pour temps froid seulement Solo calentador para clima frío Consultez la Fig. 3. Consulte la Fig. 3. Nouvelle pièce Réf. Description Pieza nueva Ref. Descripción K1.1 Borne positive de l’élément chauffant - Rouge K1.1 Calentador / terminal positivo, rojo K1.2 Borne de masse de l’élément chauffant - Noire K1.2...
- Page 8 Calentador para clima frío y máquina de hielo Élément chauffant pour temps froid et appareil à glaçons Consulte la Fig. 5. Consultez la Fig. 5. Pieza nueva Ref. Descripción K1.1 Calentador / terminal positivo, rojo Nouvelle pièce Réf. Description K1.2 Calentador / terminal de tierra, negro K1.1 Borne positive de l’élément chauffant - Rouge...