Tidying Cables - LG 42PN4500 Owner's Manual

16
ASSEMBLING AND PREPARING
CAUTION
Disconnect the power before moving or installing
y y
the TV. Otherwise electric shock may occur.
If you install the TV on a ceiling or slanted wall,
y y
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel.
Do not over tighten the screws as this may cause
y y
damage to the TV and void your warranty.
Use only screws and wall mounts that meet
y y
the VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE
Use only screws that are listed on the VESA
y y
standard screw specifications.
The wall mount kit includes an installation manual
y y
and necessary parts.
The wall mount bracket is optional. You can obtain
y y
additional accessories from your local dealer.
The length of screws may differ depending on the
y y
wall mount. Make sure to use the proper length.
For more information, refer to the manual supplied
y y
with the wall mount.

Tidying cables

1
Install the power cord holder and power cord. It will
help prevent the power cable from being removed
by accident.
(For 42PN4500)
(For 50PN4500, 50/60PN5300, 50/60PN6500, 60PN6550)
2
Gather and bind the cables with the cable holder.
CAUTION
Do not move the TV by holding the cable holder
y y
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
Power cord holder
Power cord holder
Cable holder