Table of Contents
Advertisement
1. OVERVIEW OF CHANGES
1.1. Preset compatibility with v1.0
After upgrading a MatrixBrute to v2.0 firmware it is still possible to import presets that were
saved to the MIDI Control Center prior to the upgrade. But the opposite is not true, because
v2.0 patches have new parameters that a v1.0 unit won't recognize. "Older" presets are
upgraded to v2.0 compatibility when they are imported into a v2.0 unit, and after that the
imported bank can't be exported to a v1.0 unit. The MCC senses the firmware version of the
attached MatrixBrute and won't allow that to happen.
1.2. Preset mode: Compare presets
Use the new Compare mode features to compare an edited preset to its unedited self. The
current preset can also be compared with any other preset.
When saving an edited preset, you can audition a target preset location before overwriting
it. See the full details about Compare mode
1.3. MOD mode: More custom routes
The number of custom mod routes has been expanded from 4 to 16, through the addition
of 3 banks of four routes each (17-20, 21-24, and 25-28). Follow the link to learn more about
these new
User assignable destinations
1.4. SEQ mode: New features
1.4.1. Edit Note, Mod values with Mod knob
The Mod Amount knob can now edit pitch and Mod values within a sequence pattern. See
the
Edit Note, Mod values with Mod knob section
1.4.2. Tempo adjustment
Tempo can now be changed by whole numbers as well as by decimal values. For details,
see
BPM Adjustment
1.4.3. Sequence Rotate
MatrixBrute now has the ability to rotate the contents of a sequence to the left or right, one
step at a time. Instructions are found
1.4.4. Sequence extend / duplicate
This feature can extend a pattern by copy/pasting its contents to the end of the existing
pattern. To learn how,
Arturia - Changes in version 2.0 - Overview of Changes
[p.5].
[p.6].
here
read this section
[p.8].
here
[p.4].
[p.6].
[p.7].
2
Advertisement
Table of Contents
