Troubleshooting Guide; Specifications - Midea NF20-16BA Instruction Manual

• Vacuum the back of the heater regularly to prevent dust from building up in
the air intake.
• Store the fan heater indoors in a cool, dry place out of children's reach.
Troubleshooting guide
The fan • The tip-over protection can be tripped if the fan heater sits on
heater does an uneven surface. Make sure the fan heater is level.
not start. • Is the plug securely connected to the wall socket?
• Make sure that the electrical socket is live.
• Has the overheating protection tripped and turned off the fan
heater? See the Overheating protection section above.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner.
When recycling your product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.

Specifications

220–240 V AC, 50 Hz
Supply voltage
Power 2000 W
Mains lead 1.7 m
Size 24 × 21 × 11 cm
Weight 980 g
Item
Heat output
Nominal heat output
Minimum heat output (indicative)
Maximum continuous heat output
Auxiliary electricity consumption
At nominal heat output
At minimum heat output
In standby mode
Symbol Value
P 2.000
nom
P 1.200
min
2.000
P
max, c
el 1.926
max
el 1.148
min
0.000
el
SB
6
Unit
kW
kW
kW
kW
kW
kW