Maha Energy MH-C2000 Manual

QUICK CHARGER FOR CAMCORDERS AND DIGITAL CAMERAS
Thank you for your purchase of Maha's MH-C2000 Camcorder/AAcell charger. This
charger is designed to charge nearly all the popular types of camcorder battery packs.
Even for Digital camera users there is a "AA" cell charger built in. This charger can be
used from a 12v source or from a 110v wall plug. Both 12v and 110v adapters are
included in this package.
1. Connect the unit using either power cord supplied (12v auto adapter or the 110v wall plug)
2. Attach your battery pack to the proper position on the charger.
•
Sony 7.2v Camcorder pack, use charging position (2) place battery on the charger and slide into a locked position
charging indicators will illuminate and a short tone should be heard when contact is made.
•
Panasonic & JVC 9.6v Camcorder packs, use charging position (4) place battery on the charger and slide into a locked
position charging indicators will illuminate and a short tone should be heard when contact is made.
•
AA size battery cells or UM-4, UM-3 battery packs, use charging position (5) make sure polarity is correct. Charging
indicators will illuminate and a short tone should be heard when contact is made.
•
Canon 6v Camcorder packs, use charging position (6) place battery on the charger and slide into a locked position
charging indicators will illuminate and a short tone should be heard when contact is made.
•
Sharp & JVC 6v Camcorder packs, use charging position (7) place battery on the charger and slide into a locked
position charging indicators will illuminate and a short tone should be heard when contact is made. NOTE: slide plate (8)
may need adjustment to fit battery pack.
•
Panasonic & Sony 6v Camcorder packs, use charging position (7) place battery on the charger and slide into a locked
position charging indicators will illuminate and a short tone should be heard when contact is made. NOTE: slide plate (8)
may need adjustment to fit battery pack.
•
Panasonic 4.8v camcorder pack, use charging position (7) place battery on the charger and slide into a locked position
charging indicators will illuminate and a short tone should be heard when contact is made. NOTE: slide plate (8) may
need adjustment to fit battery pack.
MAHA ENERGY CORP.
MH-C2000
1. DC Jack
2. Sony 7.2v Position
3. LED Charging Indicators
4. Panasonic & JVC 9.6v Position
5. UM-3 & UM-4 Position
6. Canon 6v Position
7. Panasonic & Sony 6v Position
8. Adjustable Sliding Plate
9. Adapter for BP-22, LCS-3212A
10. BP-22 Charging Position
11. LCS-2312A Charging Position
12. Discharge conditioning button