Table of Contents
Advertisement
Installation position
The dimensional relationship between the screen and projector is shown below.
Establish the ceiling installation position after accessing the dimensional relationship diagram and the Dimension-
al relationship.
The projection distance can be adjusted using the zoom lens. Check the projection screen while making fine ad-
justments.
The projection vertical position can be adjusted by vertical lens shift function of the projector with the lens shift
function. Then "H" will change according to lens shift amount.
■ Dimensional relationship diagram
(When using the ceiling mount bracket ET-PKL100S (for low ceilings))
Projected image
SW
(When using the ceiling mount bracket ET-PKL100H (for high ceilings))
Projected image
SW
<Units: mm (")>
Ceiling
Screen
L(LW/LT)
L1F
(5-3/16")
Ceiling
Screen
L2F
L(LW/LT)
(5-19/32")
* The thickness of
the attachment
plate is included.
L1R
132
<Units: mm (")>
* The thickness of
the attachment
plate is included.
L2R
142
ENGLISH - 5
Advertisement
Table of Contents
