Advertisement
5. Attach needle to syringe and fill with appropriate ink. (see below for
color.
Note: Immediately refill
any empty cartridges.
Inkjet Refilling Instruction
location of filling hole). Insert just the
tip of the syringe into the access fill
hole and EXTREMELY SLOWLY inject
up to 11 ml of ink into the mylar bag.
The tip of the needle need to be placed
in the middle of the access fill hole for
the bag to accept ink.
6. Rinse syringe with water before
proceeding to refill the next cartridge.
7. Seal the filling hole with the included
tape dot and proceed to the next
Advertisement
