Converting From Vacuum To Blower - Toro Ultra 51619 Operator's Manual

Converting from Blower to
Vacuum
WARNING
The impeller rotates for a few seconds after you turn
off the appliance and can cut or injure fingers.
Do not remove the bottom inlet cover when the motor
is running or when the appliance is plugged into a
power outlet.
1. Remove the bottom inlet cover and the blower tube.
2. Install the vacuum tube and bag.
Important:
The motor should not run unless the
vacuum tube is locked in place.
Note:
If the motor runs without the vacuum tube in place,
do not use the appliance. Return it to an Authorized Service
Dealer.
3. Adjust the bag strap as needed for comfortable operation.
Converting from Vacuum to
Blower
1. Remove the vacuum bag and the vacuum tube.
g227714
2. Install the blower tube and bottom inlet cover.
Important:
bottom inlet cover is locked in place.
Note:
If the motor runs without the bottom inlet cover in
place, do not use the appliance. Return it to an Authorized
Service Dealer.
g227715
3
The motor should not run unless the
g227717
g227718