Operations; Control Panel - Samsung WW8 Series User Manual

Operations

Control panel

01 Cycle Selector
02 Display
03 Temp.
04 Rinse
05 Spin
Untitled-21 33
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated
time remaining, or an information code when a problem
occurs.
Press to change the water temperature for the current
cycle.
Press to change the rinse count for the current cycle. You
can set the rinse count to a max of 5, depending on the
cycle.
Press to change the spinning speed for the current cycle.
The revolutions per minute (RPM) differs with the model.
• Rinse Hold : The final rinse process is suspended so that
the laundry remains in the water. To unload the laundry,
run a drain or spin process.
- To use the Rinse Hold option, press
repeatedly until all the Spin option indicators turn off.
• No Spin
drain process.
- To use the No Spin option, press
until the No Spin indicator (
• Spin Only
for 3 seconds. When the cycle time and spinning speed
appear, press
speed is selected. Then, press
cycle. The spinning time depends on the selected cycle.
02
03 04 05 06
: The drum does not rotate after the final
: To run the Spin Only cycle, press
Spin repeatedly until a desired spinning
Start/Pause to start the
10
08
11
09
07
Spin
Spin repeatedly
) turns on.
Spin
English 33
2017-09-29 2:39:44