Technical Data; Manufacturer Declaration - Sennheiser MKE 800 TV Instructions For Use Manual

ENGLISH
The MKE 800 TV is a microphone intended for the acoustic reduction of television
noise, and is to be used in conjunction with the Sennheiser devices Set 810 and 820.
Assembly
Attach the enclosed Velcro (self-adhesive side) as directly as possible in front of
the loudspeaker of your television set.
Press the microphone onto the Velcro.
Insert the jack connector of the microphone into the transmitter socket ("MIC").
Caution
Protect the microphone from humidity and moisture.
Do not expose the microphone to extreme high or low temperatures
(through direct sunlight, for example).

Technical data

Microphone type
Supply voltage
Sensitivity
Frequency range
Terminating impedance min. 20 k
Operating temperature +5°C to +40°C
Pin assignment

Manufacturer Declaration

EU Declaration of Conformity
This device complies with the basic requirements and additional
specifications of the 2004/108/EU guidelines. This declaration is available
on the Internet at www.sennheiser.com.
WEEE Statement
Your Sennheiser product was designed and manufactured using high-
quality materials and components, which may be recycled and re-used.
This symbol indicates that electric and electronic devices at the end of
their service life must be disposed of separately from household waste.
Please dispose of this device at your local community collection point or
at a recycling center. Please help to preserve our environment.
Guarantee: 2 years
Permanently polarized condenser microphone with amplifier
7 V to 8 V
DC DC
typ. 460 mV/Pa at 1 kHz
100 Hz to 10 kHz
2.5 mm 3-pole/microphone with
additional power supply
7,5 V NF/AF GND