Panasonic LIFI PT-56LCX70 Operating Instruction page 53

HDMI connections to some Panasonic equipment HDMI connections to some Panasonic equipment
allow you to interface automatically. allow you to interface automatically.
• • This function may not work normally depending on the This function may not work normally depending on the
equipment condition. equipment condition.
• • The equipment can be operated by other equipment's The equipment can be operated by other equipment's
remote controls with this function on even if this Projection remote controls with this function on even if this Projection
Display is in Standby mode. Display is in Standby mode.
• • Image or sound may not be available for the first few Image or sound may not be available for the first few
seconds when the playback starts. seconds when the playback starts.
• • Image or sound may not be available for the first few Image or sound may not be available for the first few
seconds when Input mode is switched. seconds when Input mode is switched.
• • Volume function will be displayed when adjusting the Volume function will be displayed when adjusting the
volume of the equipment. volume of the equipment.
• • If you connect the same kind of equipment at once (for If you connect the same kind of equipment at once (for
example: one DIGA to HDMI 1 / another DIGA to HDMI 2), example: one DIGA to HDMI 1 / another DIGA to HDMI 2),
EZ Sync™ is available for the terminal with the smaller EZ Sync™ is available for the terminal with the smaller
number. number.
• • If you connect the equipment that has "HDAVI Control 2" If you connect the equipment that has "HDAVI Control 2"
function to the TV with HDMI cable, the sound from function to the TV with HDMI cable, the sound from
DIGITAL AUDIO OUT terminal can be output as DIGITAL AUDIO OUT terminal can be output as
multi-channel surround. multi-channel surround.
Procedure
1. Press ▲▼ to select "EZ Sync setting".
2. Press OK to display the EZ Sync setting
menu.
3. Press ▲▼ to select "EZ Sync".
4. Press ◄► to select "On".
• Default setting is "On". If no HDMI devices are connected
or standard HDMI (without "EZ Sync") is used, set to "Off".
5. Press ▲▼ to select each item.
6. Press ◄► to select the setting.
Setup Setup
1/2 1/2
Surf mode Surf mode
All All
Language Language
Program channel Program channel
External devices External devices
CC CC
EZ Sync setting EZ Sync setting
EZ Sync setting EZ Sync setting
EZ Sync EZ Sync
On On
Power off link Power off link
Set Set
Power on link Power on link
Set Set
Default speakers Default speakers
TV TV
Item Item
Controls equipment connected to HDMI terminal. Controls equipment connected to HDMI terminal.
(p. 52-53) (p. 52-53)
EZ Sync EZ Sync
• • "Power off link", "Power on link", and "Default "Power off link", "Power on link", and "Default
speakers" cannot be selected if "Off" is set. speakers" cannot be selected if "Off" is set.
When "Set" is selected and this Projection Display When "Set" is selected and this Projection Display
is turned off, all connected EZ Sync compatible is turned off, all connected EZ Sync compatible
equipment is also automatically turned off. equipment is also automatically turned off.
• • DIGA (Panasonic DVD Recorder) will not turn off if DIGA (Panasonic DVD Recorder) will not turn off if
Power off Power off
it is still in rec mode. it is still in rec mode.
link link
Caution: Caution:
• • This Projection Display remains on even if the EZ This Projection Display remains on even if the EZ
Sync compatible equipment is turned off. Sync compatible equipment is turned off.
When "Set" is selected, this Projection Display When "Set" is selected, this Projection Display
is turned on automatically and switches to the is turned on automatically and switches to the
appropriate HDMI input whenever EZ Sync appropriate HDMI input whenever EZ Sync
compatible equipment is initially turned on and Play compatible equipment is initially turned on and Play
Power on Power on
mode is selected. mode is selected.
link link
• • While the power lamp is blinking, the picture While the power lamp is blinking, the picture
cannot be seen. cannot be seen.
• • Power on link will not work until lamp cooling is Power on link will not work until lamp cooling is
completed when power is turned off. completed when power is turned off.
"TV" is the default setting. To set the Home theater "TV" is the default setting. To set the Home theater
system as default speakers, change the default system as default speakers, change the default
Default Default
speakers setting from "TV" to "Theater". Sound will speakers setting from "TV" to "Theater". Sound will
speakers speakers
be output from the Home Theater whenever this be output from the Home Theater whenever this
Projection Display is powered on. Projection Display is powered on.
Automatic Input Switching
At the start of the DIGA, Player theater, or RAM theater
playback, this Projection Display's input automatically
switches to the input based on the playback equipment.
• For the RAM theater, the speakers automatically switch to the
theater system.
If using the DIGA operation, this Projection Display's input
automatically switches to the DIGA and DIGA menu is
displayed.
Speaker control
You can select Home theater, or TV speakers for audio
output.
Control theater speakers with this Projection Display's
remote control.
This function is available only when Panasonic Amplifier
or Player theater is connected.
Procedure
1. Press EZ Sync to display the EZ Sync menu.
Explanations Explanations
DVD recorder DVD recorder
Home theater Home theater
HD camcorder HD camcorder
Speaker output Speaker output
TV TV
53