Cisco Headset 500 Series Set Up; New And Changed Information; New And Changed For Headset Firmware 2.1(1) - Cisco 500 Series Administration Manual

Cisco Headset 500 Series Set Up

•
•
•
•
•

New and Changed Information

New and Changed for Headset Firmware 2.1(1)

The following table shows the changes made for Firmware Release 2.1(1).
Table 1: Cisco Headset 500 Series Administration Guide Revisions for Firmware Release 2.1(1)
Feature
Headset inventory in Cisco Control Hub through Cisco
Webex Teams
The Cisco Headset 560 Series conferencing feature is
now enabled by default.
The Cisco Headset 560 Series reduces DECT frequency
when the headset is secured on the base.
Headset upgrade progress displays on the Cisco Jabber
UI (Cisco Jabber version 12.9 or later)
Headset upgrades through Cisco Webex Teams
Headset upgrades through the Cisco Headsets Web Tool
New and Changed Information, on page 1
About the Cisco Headset 500 Series, on page 3
Deploy Your Cisco Headset 520 Series and Cisco Headset 530 Series, on page 3
Deploy Your Cisco Headset 560 Series, on page 4
Related Documentation, on page 7
1
C H A P T E R
Updated Section
Headset Administration on Webex Control Hub,
on page 26
Headset Template Management, on page 17
Poor Audio Quality, on page 37
Update Your Headset Firmware on Cisco Jabber,
on page 39
Upgrade Your Cisco Headset to the Latest Release
on Cisco Webex Teams, on page 39
Upgrade Your Headset with the Cisco Headsets
Web Tool, on page 40
Cisco Headset 500 Series Administration Guide
1