Power (ON/Off) button
SAP
POWER
CH
VOL
VOL
CH
BBE
RECALL
MENU
The Power Indicator
LED
Not illuminated
Green
Green blink
(approximately 10 seconds after)
Orange
Power – OFF (Blanking mode)
(approximately 10 seconds after)
Orange blink
Power – OFF (Cooling mode)
(approximately 90 seconds after)
Menu Language Selection
In SET UP Menu, Select IDIOMA/LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French). (refer to page 22)
POWER
ACTION
Stand – by
Power – ON
Power – ON
ENGLISH
Push the Power button to turn the projection TV ON,
from Stand-by mode.
The Power Indicator will blink Green.
The Power Indicator will become Green.
Push the Power button to turn the projection TV to
Stand-by mode.
The Power Indicator will become Orange.
The Power Indicator will blink Orange.
The power Indicator light will go out.
Note:
The TV will still consume some power as long as the
power cord is still inserted into the wall outlet.
Power ON / OFF
Approximately 10 seconds
Approximately 10 seconds
Approximately 90 seconds.
19