Loading Diagnostics - IBM 5531 Operator's Manual

Problem Determination Procedures
Loading Diagnostics
If you came here from "Formatting a Diskette," go to Step 11. Otherwise begin with Step 1.
1. Remove the Diagnostics diskette from the back of this manual.
2. Set the system unit's Power switch to Off.
3. Set the power switches on all attached devices to Off.
4. Open the drive cover door.
5.
Open the drive load lever, and insert the Diagnostics diskette in the drive.
6. Close the drive load lever.
7. Set the power switches on all attached devices to On.
8. Set the system unit's Power switch to On.
9. Did the following appear on your screen?
5-16
Operator's Guide
YES - Press the Fl key; then proceed with Step 10.
NO - Proceed with Step 10.