Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Brookstone BKSSDW
- Page 1 SMART DOOR/WINDOW SENSOR USER MANUAL FCC ID: Z52NAS-DS01W0...
- Page 2 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. For more products please visit www.brookstone.com...
-
Page 3: Specifications
SPECIFICATIONS Model: BKSSDW Battery: CR2-3V x 1 Standby current: 13uA Working current: 115mA-120mA Standby time: 5 Years Working time: 1 year (7 times/day); 2 years (3 times/day) Wi-Fi Standard: 2.4GHz 802.11b/g/n Wireless range: 147ft Operating temperature: 32°F - 104°F Operating humidity: 20% - 85% Storage temperature: 32°F - 140°F... - Page 4 FEATURES • Wi-Fi connected • Sends alerts whenever door/window is opened/closed • Long battery life...
-
Page 5: Warranty Information
WARRANTY INFORMATION One Year Limited Warranty. Customer Service Number: 732-994-2301 The BROOKSTONE trademark. names and logos are owned by BKST Brand Holdings LLC ©2019. All rights reserved Manufactured, marketed and distributed by Smartpoint LLC, under license Google and Google Play are trademarks of Google LLC. -
Page 6: Product Configuration
PRODUCT CONFIGURATION Door sensor LED Light small body Door sensor main body Disassemble button Reset button Anchor Stickers Battery Screw Reset process: (1) Press the reset button for 6 seconds, then release, the indicator light will flash rapidly. The device will then be in smart wifi... -
Page 7: Device Modes
DEVICE MODES Status of LED Light Definition Wi-Fi Connect Mode Indicator LED light (When sensor is ready flashes quickly to connect to Wi-Fi) AP mode Indicator LED light (Connects phone’s Wi-Fi flashes slowly to sensor’s hotspot) Triggered mode Indicator LED light (When the sensor flashes for a few seconds detects opening of... -
Page 8: Download App
DOWNLOAD APP 1. Android: download “Brookstone Smart” app on GooglePlay. 2. iPhone: download “Brookstone Smart” app from the App Store. Brookstone Smart... -
Page 9: Registration And Login
REGISTRATION AND LOGIN 1. Run the “Brookstone Smart” app from your smart phone. 2. Register and login. - Page 10 PLACEMENT OF DEVICE Place main body on one side of the opening and the small body on the other side(please see images below). Use the enclosed stickers or screws to mount the sensors.
-
Page 11: Add Device
If not, then press and hold the reset button for 6 seconds, until the indicator light blinks rapidly. The device is now ready to link to your account via the Brookstone Smart app. Reset Button... - Page 12 2. Make sure phone is connected to your Wi-Fi network and that it is a 2.4GHz network. 3. Press the (+) symbol in the top right corner of the app and select the Door/Window Sensor from the list of devices to add.
-
Page 13: Network Configuration
NETWORK CONFIGURATION 4. Confirm indicator light is blinking and press the “confirm indicator rapidly blinks” button to connect in Smart WiFi Mode. 5. Make sure phone is connected to the Wi-Fi network that the device will be connected to. Enter your password for the Wi-Fi network. - Page 14 6. Connecting process will begin. Do not turn off Smart Door/Window Sensor or phone while connecting. Wait for connection process to complete. 7. Once device has been successfully added, name the device what you would like it to be called in the app.
- Page 15 8. Notice: Only follow steps 8-11 if connecting in AP mode. From the smart wifi connect page click on “AP Mode” in the top right corner. 9. When light is blinking rapidly hold reset button for 6 seconds and the light should now blink slowly.
- Page 16 10. Make sure phone is connected to the Wi-Fi network that the device will be connected to. Enter your password for the Wi-Fi network. 11. Follow the on screen instructions. Connecting process will begin. Do not turn off Door/Window Sensor or phone while connecting. Wait for connection process to complete.
-
Page 17: Main Functions
MAIN FUNCTIONS The Smart Door/Window Sensor will detect when the door/window is opened/closed. It will send an alert 3-5 seconds after sensor is triggered. 2. To view alarm recording history click the “HISTORY” button. 3. To turn off/on push notifications click the “NOTICE” button. - Page 18 4. To connect two devices via scene click on “Smart” button on the bottom center of the home screen. Then click the (+) symbol at the top right of the screen. 5. Now you can have certain devices carry out actions based on notifications of other devices.
-
Page 19: Device Sharing
DEVICE SHARING You can allow others in your family to have access to the Smart Door/Window Sensor to receive alerts. 2. Click on the “me” button at the bottom right of the home screen. They click on your family at the top. (If you changed the name of your family in the app it will appear as what you changed it to here). - Page 20 3. Click on “Add Member”. 4. On this screen fill out the information of the family member you would like to give access to. Make sure to use the phone number or email that your family member set up their Brookstone Smart account with.
-
Page 21: Push Notifications
PUSH NOTIFICATIONS You can turn on/off notifications for all devices connected to app by clicking on the “Me” button at the bottom right of the screen. 2. Then click on ”Settings” button. From there you can turn on/off all notifications. -
Page 22: Remove A Device
REMOVE A DEVICE From the home screen, click on the device you would like to remove. 2. Then click on the edit symbol on the top right of the screen. 3. From there you would then click the “Remove Device” button at the bottom of the screen.