Speaker Configuration
What speaker types and sizes are you using? The fol-
lowing is an overview of the Speaker Configuration
menu.
To access the Speaker Configuration menu:
1
Press the Main button on the remote control.
2
Press the Setup button.
3
Use the / buttons to select SPEAKER CONFIG,
then press the Select button.
4
Use the / buttons to choose from the follow-
ing menu items:
FRONT
Selects the relative size of your front speakers. Use
the / buttons to select:
•
Small or Large
•
Select Small if you DO have a subwoofer.
•
Select Large if you do NOT have a subwoofer.
CENTER
Selects the relative size of your center speaker (if
applicable). Use the / buttons to select:
•
Small, Large, or None
•
Select Small if you DO have a subwoofer.
•
Select Large if you do NOT have a subwoofer.
•
Select None if you do not have a center speak-
er.
SURROUND
Selects the relative size of your surround speakers (if
applicable). Use the / buttons to select:
•
Small, Large, or None
•
Select Small if you DO have a subwoofer.
•
Select Large if you do NOT have a subwoofer.
•
Select None if you do not have a surround speak-
er.
SURR BACK
Indicates the presence and configuration of your sur-
round back speakers. Use the / buttons to se-
lect:
•
BS-LB, LB/RB, or None
•
Select BS-LB if you have a SINGLE surround back
speaker (BS) connected to the left back (LB) out-
put.
•
Select LB/RB if you have TWO surround back
speakers connected to the left back (LB) and
right back (RB) outputs, respectively.
•
Select None if you do NOT have surround back
speakers.
www.adcom.com
SUBWOOFER
Indicates the presence of a subwoofer. Use the /
buttons to select:
•
Yes or No
•
Select Yes if you DO have a Subwoofer.
•
Select No if you do NOT have a Subwoofer.
FRNT XOVER
Sets the front speaker crossover frequency; i.e., the
frequency (in Hz) at which audio signals are routed
from your front speakers to the subwoofer. Use the
/ buttons to select:
•
40, 60, 80, 100, 120, 150
•
If you set your front speakers to Large, then this
setting will be fixed at None.
CNTER XOVER
Sets the center speaker crossover frequency; i.e., the
frequency (in Hz) at which audio signals are routed
from your center speaker to the subwoofer. Use the
/ buttons to select:
•
40, 60, 80, 100, 120, 150
•
If you set your center speakers to Large, then
this setting will be fixed at None.
SURR XOVER
Sets the surround speaker crossover frequency; i.e.,
the frequency (in Hz) at which audio signals are rout-
ed from your surround speakers to the subwoofer.
Use the / buttons to select:
•
40, 60, 80, 100, 120, 150
•
If you set your surround speakers to Large, then
this setting will be fixed at None.
GFR-700HD Owner's Manual
37