Whirlpool MH6600XWl Use & Care Manual page 20

4. To replace grease Men,
5. To replace charcoal filter:
slide fflter In the frame slot on remove the vent cover
the front of the openlng.
mounting screws.
Push ftlter upward and push
6.
Tip the cover forward, then
to the rear to lock Into place.
lift out to remove.
7. Lift the back of the
charcoal fllter. Slide the
filter straight out.
8.
Slide a new charcoal ftlter
Into place. The ftlter should
rest at the angle shown.
9. Slide the bottom of the
vent cover Into place.
Push the top until It snaps
Into place. Replace the
mounting screws.
10.
Turn the power back on
at the main power supply
11. DO
not operate the hood
without the filters In place.
20