Unpacking And Inspecting The Switch - Cisco MDS 9396T Installing

Installing the Cisco MDS 9396T Switch

Unpacking and Inspecting the Switch

Figure 2: Handling the Chassis
Unpacking and Inspecting the Switch
Caution
When handling switch components, wear an ESD strap and handle modules by the carrier edges only. An
ESD socket is provided on the chassis. For the ESD socket to be effective, the chassis must be grounded
through the power cable, the chassis ground, or the metal-to-metal contact with a grounded rack.
Tip Keep the shipping container in case the chassis requires shipping in the future.
Installing the Cisco MDS 9396T Switch
4