Husqvarna LC48 Workshop Manual page 23

Controls
Short-circuit contact
Model LC53 Be
Prize off the contact using a knife and
disconnect the short circuit cables.
Prize off the cover (D) using a screwdriver.
Lift off the control arm (E).
Remove the starter pulley (F) and the
control cable (G).
See above with regard to connecting the
cable to the gearbox.
Replace damaged parts and assemble
in the reverse order as set out for dis-
mantling.
Short-circuit contact
Model LC53 Be
Prize off the contact using a knife placed
between the cover and the contact.
Disconnect the short circuit cables from
the contact pins.
The cover can be lifted off once the
screws on the rear side have been
removed.
3
21