Related Manuals for Spirit SPRT EU1121
Summary of Contents for Spirit SPRT EU1121
- Page 1 SPRT ® EU1121 KIOSK PRINTER USERS’ MANUAL (SP-EU1121) (VER 1.05) Beijing Spirit Technology Development Co.,Ltd www.sprt-printer.com...
- Page 2 Safety Instruction Safety warming 1), The printer head is heating parts, do not touch the printer head and surrounded parts during printing and end printing. 2), Do not touch the surface of the printer head and connected socket, to avoid the electrostatic damage of the print head.
-
Page 3: Table Of Contents
Contents Brief Introduction............................1 Chapter 1 Characteristics and performance.....................1 1.1 Print performance........................... 1 1.2 Print paper............................1 1.3 Character set........................... 2 1.4 Interface............................2 1.5 Printing control command......................2 1.6 Power supply........................... 2 1.7 Installation Dimension........................3 1.8 Work Environment.......................... 3 1.9 Model Classification........................3 Chapter 2 Operating instructions........................ -
Page 4: Brief Introduction
Brief Introduction SP-EU1121 printer is a new thermal line panel printer, with drop-in paper easy loading, auto cutter,Black label detection,printing speed faster and more reliable. It well support folded paper, and paper rolls with different diameters. SP-EU1121 printer easy operation, applications widely, especially to queue machine,POS for bank and the business of all kinds of needed docs to print. -
Page 5: Character Set
● Thermal Label paper size: width ----------- 103±0.25mm Length ---------- 50～200mm 1.3 Character set ● ANK character set: 12×24 dot,1.5(width)×3.00(high)mm 8×16dot, 1.0(width)×2.00(high)mm ● Chinese: 24×24 dot,3.00(width)×3.00(high)mm 16×16dot, 2.00(width)×2.00(high)mm 1.4 Interface ● RS－232C serial port: DB-9 socket(pin point),support XON/XOFF and DTR/DSR. Baud rate:1200,2400,4800,9600,19200,38400,57600,115200bps adjustable. -
Page 6: Installation Dimension
1.7 Installation Dimension Folded paper bracket ●Outline dimension: 398mm×184mm×180mm(L×W×H) 1.8 Work Environment ● Working stability: 0~50(no condensation) Operating Relative Humidity: 10%~80% (no condensation) ● Storage stability: -20~60(no condensation) Storage relative humidity: 5%~95% (no condensation) 1.9 Model Classification model interface SP-EU112SU RS-232C and USB... -
Page 7: Chapter 2 Operating Instructions
Chapter 2 Operating instructions 2.1 Printing Unit components... -
Page 8: Instructions For Paper Install
2.2 Instructions for paper install 2.2.1 Paper Loading SP-EU1121 printer needs 103±0.5mm thermal paper roll. Thermal paper installed as below: In the state of power-on, pull out a little paper from the paper roll, then put the paper into the mouth of printing mechanism, the printer will auto paper feed. - Page 9 2-5 RS232 socket Each pin signal is defined as shown in figure 2-5: Pin No. Signal Signal Source Explain name direction ---- ---- input Host Printer receive data from computer output printer Printer send control code XON/XOFF and data to computer. output printer When the signal show "MARK", it is means the...
-
Page 10: Power Supply Connection
2-6 RS232 interface with user’ side connection 2.3.2 Power supply connection For SP-EU1121 printer, the power supply is external 24V±10%, 4A, socket is VH3.96-4P type, Shape and pin definition as shown in figure 2-9, Picture 2-9 Socket and pin definition 2.4 Lights and Buttons Operation SP-EU1121 printer has one button and three lights. - Page 11 According to blinks in a different way, it indicates the different types of printer error: 1, Non-recoverable error, The times of lights flashing indicates wrong type, then will light for a long time. 2, Recoverable errors, the times of lights flashing means the error type, then will light-off for a period.
-
Page 12: Normal Working Mode
temperature error and the upper cover to open the print process error. Error type ERROR lights flash type ERROR lights flash type Recoverable LED flash continuous: the printer head errors is overheating, or open the wrong printing mechanism in the process of printing roller. -
Page 13: The Printer Parameters Setting
once, totally three times, print out "*** Completed ***", quit HEX DUMP mode. 2.8 The printer parameters setting This function is to set up some simple parameters for the printer. Enter into parameter setting method: In printer off mode, open the 【printing rubber roller】 first, press the button of 【FEED】 , then open the power supply, after the status indicators and lack of paper lights flashing alternant release the button of【FEED. -
Page 14: Appendix A: Parameters Setting
Appendix A: Parameters setting This appendix shows the way, through which printer’s parameters are sett through the button. Setup instruction: use the button of 【 printing rubber roller 】 to choose the setting items, change the item by press the button【printing rubber roller】, and print out the current value. Use the button of 【FEED】... - Page 15 FEED Re-printing lack of paper: FEED FEED Black label mode: FEED FEED...