Yamaha YP250R X-MAX 2005 Service Information page 44

MAINTENANCE AND PERIODIC LUBRICATION TABLE
NOTE:
• The verifications marked annual must be carried out each year, unless verifica-
tions are made according to the kilometre counter.
• From 50,000 km , repeat maintenance intervals every 10,000 km.
• The operations marked with an asterisk should be made by Yamaha dealer, given that
the required tools and specific data as well as the technical qualifications will be requi-
red.
Nº ELEMENT
• Check all the fuel lines and vacuum tubes for cracks
1 * Fuel line
and damage.
• Check condition.
2 Spark plug • Clean and adjust the distance between the electrodes.
• Replace.
• Check the valve clearance.
3 * Valves
• Adjustment.
4 Air filter • Replace.
• Clean.
* Trapezoidal belt
5
housing air filter • Replace.
• Check operation, fluid level and check for leaks.
6 Front brake
• Change brake pads.
• Check operation, fluid level and check for leaks.
7 Rear brake
• Change brake pads.
• Check for cracks and damage.
8 * Brake line
• Replace.
9 * Wheels • Check off-centre and damage.
• Check tread depth, check for damage.
• Change if necessary.
10 * Tyres
• Check tyre pressure.
• Correct if necessary.
11 Wheel bearings • Check if the bearings are loose or damaged.
• Check the bearing play and if the steering is difficult.
Steering
12
bearings
• Lubricate using lithium soap base grease.
Frame • Check that all of the nuts, pins and bolts are correctly
13
attachments tightened.
Side stand, centre • Check operation.
14
stand • Lubricate.
Side stand
15 • Check operation.
switch
16 * Front forks • Check operation check for oil leaks.
Shock
17 • Check operations and if the shock absorbers loose oil
absorbers
18 * Carburettor • Adjust the engine idle.
• Replace. (See page six 6-7.)
19 Engine oil
• Check oil level, check for oil leaks.
20 Engine oil filter • Clean.
• Check coolant level, check for oil leaks.
21 * Cooling system
• Replace.
Final • Check for leaks.
22
transmission oil • Replace.
23 * Trapezoidal belt • Replace.
INSPECTIONS AND PERIODIC
VERIFICATION AND MAINTENANCE
OPERATION
ADJUSTMENTS
KILOMETER COUNTER READING
1
√
Always when the wear limit is reached
√
Always when the wear limit is reached
√
√
√
When the oil change indicator
√
is lit (every 3000 kilometres)
√
√
√
36
CHK/
ADJ
( x 1.000 km)
10 20 30 40
√ √ √ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √ √ √
√ √ √ √
√ √ √ √
Every 4 years
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
Every 20,000 km
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
√ √ √ √
Every 3,000 km
√ √ √ √
Every 3 years
√ √
√ √
Every 20,000 km
ANNUAL
REVISION
√
√
√
√
√
√
√
√
√
√