Figure 15 Crv Motor Speed/Cfm Configuration - Bard I-TEC Series Installation Instructions Manual

1. Open front swinging doors of main unit (by popping
front door latches).
2. Throw main power disconnect to the "OFF"
position to eliminate risk of injury or death due to
electrical shock.
3. Remove six (6) screws holding front CRV door in
place (See Figure 16).
BROWN/WHITE
Move brown/white wire to corresponding motor
speed for required ventilation CFM. Factory
setting is Medium Hi (450 CFM).
Manual 2100-578L
Page 30 of 42
4. Locate brown wire with white trace that has a
5. Move brown wire with white trace to the
FIGURE 15
CRV Motor Speed/CFM Configuration
VENT OPTION INTAKE/EXHAUST SPEEDS
WIRE COLOR SPEED NOM. CFM
BLACK HI
BLUE MED-HI
ORANGE MED-LO
RED LO
TO CHANGE SPEEDS, MOVE BROWN
WIRE WITH WHITE TRACE.
black terminal on the end where it connects to the
terminal strip (See Figure 15).
corresponding CFM level needed in accordance
with Figure 15.
525
450
375
300
7961-755-2
HI
MED. HI
MED. LO
LO
7961-7554
BLACK
BLUE
ORANGE
RED
MIS-3206