First-time Operation
1
A
2
A
12
1
2
A
■
To remove the battery pack
While sliding the left and right latches (C) to the unlocked
B
position
computer.
CAUTION
●
Make sure the battery pack is securely locked. If not, the
battery pack may fall when you carry the computer.
●
Do not touch the terminals of the battery pack and the
computer. Doing so can make the terminals dirty or
damaged, and may cause malfunction of the battery pack
and the computer.
NOTE
C
●
Note that the computer consumes electricity even when
the computer power is off. For the period of time the fully
charged battery will fully discharge, refer to è
Instructions - Reference Manual "Basic Operation" "Battery
Power" "Battery duration".
●
When the DC plug is not connected to the computer,
disconnect the AC cord from your AC wall outlet. Power is
consumed simply by having the AC adaptor plugged into an
electrical outlet.
2
Hold the side of the computer with either of your hands and
then hold and lift the (A) part to open the display.
CAUTION
●
Do not open the display wider than necessary (180° or
more), and do not apply excessive pressure to the LCD. Do
not open or close the display holding the edge of the LCD
segment.
Insert the battery pack
Turn the computer over.
Slide the battery pack in parallel with the arrow direction.
Attach the battery pack so that the left and right projections
(A) on the battery pack match the dents (B) of the
computer.
, push out the battery pack in parallel with the
Open the display
Operating