Declaration Of Conformity - Parker R4V Series Translation Of Original Operating Instructions

Translation from German

Declaration of Conformity

EC Declaration of Conformity / Translation from German
Mr Günther Funk is authorised to compile the technical file.
For enquiries, see the company address.
Parker Hannifin Manufacturing Germany GmbH & Co. KG declares that the safety valves
Type R4V*V and R4V*W
Type R6V*V and R6V*W
Type DSDU 578 P20E TÜV and DSDU 1078 E*E TÜV
fulfil all the relevant provisions of the
Machinery Directive 2006/42/EC
and
also fulfil all the relevant provisions of the following EC Directives:
Pressure Equipment Directive 97/23/EC
The valves have been approved for module G / category IV / fluid group 1 as defined in the Pressure Equipment
Directive 97/23/EC, by
TÜV Industrie Service GmbH
Gottlieb-Daimler-Str. 7
70794 Filderstadt
ID 0036
Harmonised standards applied:
DIN EN ISO 4126-4:2004-05
DIN EN 60529:2000-09
National standards and technical specifications applied:
VDTÜV Merkblatt Sicherheitsventil 100 (Safety Valves)
AD-2000-Regelwerk W3/2 - Spheroidal-graphite cast iron, non-alloy and low alloy
Place, Date:
Signature:
The undersigned:
Any unauthorised structural change or
addition to the product may jeopardise
safety to an unacceptable degree. This
R_V-DSDU 5715-661 UK.indd 11.12.19
2006/42/EC
Parker Hannifin
Manufacturing Germany GmbH & Co. KG
Hydraulic Controls Division Europe
Gutenbergstrasse 38
41564 Kaarst, Deutschland
Safety devices for protection against excessive pressure
Degrees of protection provided by enclosures (IP code)
Kaarst, 11.07.2011
Hansgeorg Kolvenbach / Business Unit Manager Industrial Valves
14
Pilot Operated Pressure Relief Valves
Series R4V*/R6V*/DSDU*
would invalidate the declaration of con-
formity supplied with the product.
Parker Hannifin Corporation