Table of Contents
Advertisement
Using your freezer
2 5x._..__
" . -,I~.:,
The Power Saving Control...
operates
electric
heaters. These heaters help pre-
vent morsture
from forming
on the outsrde
of the
freezer when humrdity
is high
1 Use the OFF setting when humrdity
IS low
2 Use the ON setting only if morsture forms on the
outside of the freezer
Changing the light bulb...
Adjusting the temperature control...
I. Turn control to higher number
for colder temper-
atures.
2. Turn to lower number
for less cold temperatures.
Cooling freezer first...
I. Allow freezer to cool 6 to 8 hours before filling with
frozen food.
2. Let it cool overnight
before adding
large amount
of
unfrozen food.
Note:
When freezer is first started, the compressor
will run constantly
until the cabinet
is cooled
It may
take up to 6 to 8 hours or longer, depending
on room
temperature
and the number
of times the freezer
door
IS
opened.
After the cabinet
IS cooled,
the compressor
will
turn ON and OFF as needed
to keep the freezer at
the proper temperature.
Setting the temperature
control...
To start, turn control to the middle
of the dial. This
setting is designed
to maintain
the temperature
at
or near
0°F [ - 17.8 "C) under
normal
operating
conditions.
WARNING: To avoid possible shocks, first unplug
freezer or turn off electricity
leading
to freezer at the main power supply.
I, Remove the light shield from the side of the control
panel. Depress the bock of the shield to release the
tabs, then pull away.
2. Replace
bulb with Q 40.watt appliance
bulb.
3. Replace
the light shield. Insert the shield tabs in the
slots, then press the shield to snap into place.
Light Shield
Hide quick links:
Advertisement
Table of Contents
