Adjusting The Shelf Glides; Changing The Light Bulbs; Removing The Base Grille - Whirlpool ET22DK Use & Care Manual

Using Your Refrigerator
Continued
along
guide
Adjusting the shelf glides
The shelf glides can be used to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along guide.
Shelf glide cannot be removed.
Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main power
supply. Failure to do so could result in
electrical shock or personal injury.
To change refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to find bulbs.
3. Remove bulb.
4. Replace with a 40-watt appliance bulb.
5. Reconnect power supply.
To change freezer light:
(ET22DM, ET22DK, ET22RM and ET22RK)
1. Disconnect refrigerator from power supply.
2. Grasp the top and bottom of the light shield.
3. Squeeze and pull light shield out.
4. Replace bulb with a 40-watt appliance bulb.
5. Replace light shield.
6. Reconnect power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with one
of the same size and shape.
Removing the base grille
To remove the grille:
1. Open the door.
2. Pull grille outwards as shown.
3. Do not remove Tech Sheet fastened
behind grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the door.
See cleaning instructions for defrost pan and
condenser coils on page 11.