Table of Contents
Advertisement
Adjusting
the refrigerator
shelves...
Shelves can be adjusted
to match the way you use
your refrigerator.
Moving the meat pan and cover.. .
The meat pan can be taken out and moved
the
same way as the shelves, Remove the meat pan first.
To remove shelves:
I, Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace:
I. Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
L, *
.5.:-L%. ,.
Removlng:
I, Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lrft up at back.
6. Pull straight out
Replaclng:
1. Guide
the rear hooks tnto the slots in the shelf
supports.
2. Tilt up front of cover until rear hooks drop Into slots
Lower front of cover to level position.
3. Replace
meat pan in reverse order.
Removing the crispers and crisper covers...
Removlng crispers:
1. Slide crispers straight out to stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace
in reverse order.
Removing covers:
Covers are held in by two pegs at the back and two
notched
tabs in front.
1. Press front out of way.
2. Lift cover front.
3. Lift back out of pegs.
4. Replace
in reverse order
If necessary, the center leg can be made shorter or
longer to help level the crisper covers. Turn the leg
clockwrse to make it longer.Turn the leg counterclock-
wise to shorten it.
. .
..,. ., r..
._
Removing
the freezer shelf.. .
.
1 III? front sltghtly.
2.
Lift
back off supports
3. Replace
in reverse order.
Ice cube trays.. .
To remove Ice:
I, Hold tray at both ends.
2 Slrghtly twist.
If cubes are not used, they may shrink. The moving
cold air starts a slow evaporation.
The longer cubes
are stored. the smaller they get.
6
Advertisement
Table of Contents
