Lcd Backlight; Tag Installation - Hanna Instruments HI 847492 Instruction Manual

SET INSTRUMENT ID
The instrument ID is a four digit number that can be edited by the user. The instrument ID is downloaded
on the PC application, together with the logged data. By setting a different ID for each instrument it is
possible to combine information from many turbidimeters into the same database.
• To set the instrument ID, press CAL/RCL when
the "Set instrument ID" panel is displayed.
The default instrument ID is 0000. The existing
ID value and the CFM tag will start blinking.
• Press the UP or DOWN keys to set the new
instrument ID. By pressing and holding the UP
or DOWN keys, the changing speed will increase.
• Press LOG/CFM to save the change. The new
instrument ID will be displayed.
Alternatively, press CAL/RCL to exit without
saving the changes.

LCD BACKLIGHT

The LCD can be illuminated to allow the user to see the readings even in the
dark.
To turn on or off the backlight, hold the GLP
The backlight will automatically shut-off after 25 seconds of non-use to save
the battery life.

TAG INSTALLATION

The tag is housed in rugged stainless steel that can withstand harsh conditions. However, it is
better to protect the tag from direct rain.
Place the tag near a sampling point. Fix it securely with the screws provided, in such a way that
the metallic iButton ® is easily accessible for reading the tag.
The number of tags that can be installed is practically unlimited. Additional tags can be ordered.
(See Accessories, page 27 for HI 920005 - five tag holders with tags.)
key for 3 seconds.
24