General Installations - HP 16600A Series Installation Manual

Measurement Modules Measurement Modules
Measurement Modules Measurement Modules
for HP 16600A Series/ HP 16700A/ HP 16702A
General Installation
Power
Busy
Power down
1
the system.
3
4
(Other
CAUTION
Use a grounded wrist strap and mat when handling the
the center of the module or filler panel while tightening the thumb screws. Use filler panels in
empty slots for proper cooling.
Carefully slide the module
inserting more than one
A single-module configuration can be installed in any available slot.
Some modules require calibration if they are moved to a different slot. For calibration
information, refer to the online help for the individual
modgen
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CAUTION
5
modules
Remove
or filler panels.
modules or
filler panels.)
into the frame and hand tighten the thumb screws. If you are
module , the tightening order is bottom
40
Be sure the frame is unplugged before
removing or installing modules.
Disconnect the
2
power cable.
Insert
or filler panels.
(Other modules
filler panels.)
modules . Gently apply pressure to
module to top module
modules .
modules
or
.