Solving Common; Dishwashing Problems - Whirlpool 980 Series Use And Care Manual

Whirlpool 980 series dishwasher use & care guide
Hide thumbs Also See for 980 Series:
Table of Contents

Advertisement

Solving
Common
Dishwashing
Problems
A convenient
checklist for handling minor performance problems. Go over this list before
calling for service. If you are unable to solve your dishwasher's
problem, turn to page 24 for
service information.
Solution
chart
PROBLEM
CAUSE
SOLUTION
Food soil left
Improper loading
Follow loading instructions
on pages 6-9.
on dishes
Water temperature
Use the HIGH TEMP WASH option. Do not
too low
use the LOW ENERGY RINSE option. If
needed, turn home water heater up to ensure
water entering dishwasher
is 120°F (49°C)
minimum. See "To check water temperature"
on page 19. NOTE: In some cases, loads may
not dry as well when using the HIGH TEMP
WASH option.
Use of incorrect, too
Use recommended
dishwasher
detergents only.
little or ineffective
Follow recommendations
on page 10 for
detergent
amounts. Never use less than one tablespoon
per load. Detergent must be fresh to be effec-
tive. Always store detergent tightly-closed
in a
cool, dry place.
Detergent cakes in
Use fresh detergent only. Do not allow deter-
dispenser
gent to sit for several hours in a wet dispenser.
Check dispenser for caked detergent. Clean
dispenser when caked detergent is present.
lnsuffiiient
fill due to
Home water pressure should be 20 to 120
bw water pressure
pounds per square inch (psi) for proper
dishwasher
fill. A booster pump on the water
supply may be necessary if pressure is
too low.
Spotting
and filming
Slowdown of wash
Never use soap or laundry detergents.
Use
am-r due to high suds
recommended
dishwasher
detergents only.
Hard water or high
Use rinse agent to help prevent spotting
mineral content in
and filming. See page 11. To remove hard
water
water film, see "Removing spots and film" on
page 22.
Water temperature
Use the HIGH TEMP WASH option. Do not
too low
use the LOW ENERGY RINSE option. If
needed, turn home water heater up to ensure
water entering dishwasher
is 120°F (49°C)
minimum. See "To check water temperature"
on page 19. NOTE: In some cases, loads may
not dry as well when using the HIGH TEMP
WASH option.
Use of incorrect
Use recommended
dishwasher
detergents only.
detergents
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents