Option Selections; Cycle Status Indicators - Whirlpool 925 Series Use And Care Manual

Option Selections

You can customize your cycles by pressing an option. If
you change your mind, press the option again to turn the
option off. Select a different option if desired.
You can change an option anytime before the selected
option begins. For example, you can press an unheated
drying option any time before drying begins.
After a wash cycle, the dishwasher remembers the options
used and uses the same options in the next wash cycle,
unless you select new options or press Cancel/Drain.
POWER SCOUR™ (on some models)
Select this high-temperature option for improved cleaning
of heavily soiled dishes. Selecting this option adds heat,
water and time to the wash cycle. Heating the water helps
improve washing results.
The Pots-N-Pans cycle, with POWER SCOUR, is
recommended for baked-on soil.
NOTE: POWER SCOUR is an option with Pots-N-Pans,
Heavy and Normal.
High Temp Wash (on some models)
Select this option to heat the water to 140°F (60°C) in the
main wash. This option adds heat and wash time. Heating
the water helps improve washing results.
NOTE: The Pots-N-Pans and Heavy cycles automatically
use this option. High Temp Wash is an option with Normal,
Low Energy, Low Energy/China and Crystal/China.
Air Dry
Select this option to dry dishes without heat and save
energy. The dishes take longer to dry and some spotting
can occur.
For best drying, use a liquid rinse aid. Some items (such as
plastics) may need towel drying.
NOTE: The dishwasher automatically heats the air in the
dishwasher during the "dry" portion of the cycle unless
you select Air Dry.
Delay Hours
Use Delay Hours to run your dishwasher at a later time or
during off-peak hours. You can add items to the load
anytime during the delay countdown. After adding items,
close the door firmly until it latches. The delay countdown
will not continue if the door is not latched.
To delay the start
1. Close the door.
2. Press DELAY HOURS 1 time for a 2-hour delay, 2 times
for a 4-hour delay, or 3 times for a 6-hour delay.
3. Select a wash cycle and option.
The number glows above Delay Hours. The dishwasher
starts the cycle in the selected number of hours. If you do
not press a cycle within 30 seconds the Delay Hours
indicator turns off.
NOTES:
To cancel the delay and cycle, press CANCEL/DRAIN.
To cancel the delay and start the cycle, press DELAY
HOURS until 6 glows. Then press DELAY HOURS one
more time. The delayed cycle starts.
IMPORTANT:
Operate your dishwasher only when you are at home.
If your home is equipped with a water softener, do not
start the dishwasher during the regeneration of the
softener.

Cycle Status Indicators

Follow the progress of your dishwasher with the Cycle
Status Indicators. CLEAN glows when a cycle is finished.
The light turns off when you open the door or press
Cancel/ Drain.
Water Heating
WATER HEATING glows whenever water is heated during a
cycle. Wash or rinse action continues as the water heats.
15