Whirlpool 400 Series Use And Care Manual page 17

Disconnecting the dishwasher
1. Turn hot water off. (Thii can be done
after the last rinse.)
2. Press the red button on the connector to
release the water pressure.
3. Lift slightly on the hose connector while
pulling down the looking collar. Pull down
on the connector.
4. Empty any remaining water from the
oonneotor by turning the connector
upside down.
5. Unplug Power supply cord and return to
storage compartment.
8. Return hoses to storage compartment.
Hose connection
Electrical connection
Apowersup~lyof120vo#s,6OHzAC,l5or
20 amps, is required. Par your Personal
safety, this appliance must be grounded. This
a@ance is equipped with a power supply
cord having a 3prong grounding Plug. To
minimize
possible shock hazard il
must be
plugged into a mating &Prong grounding tyfx
wall receptacle, grounded in accordance with
the National Electrical Code and local codes
and ordinances. If a mating wall receptacle is
not avaibble, it is the responsibility and
obligation of the customer to have a properly
grounded 3prong wall receptacle installed by
a qualified electrician.
a-prong
grounding
Power 8upply
cord
3-pro& grounding
type wall receptacle
Fire Hazard
An extension cord should not be used
with this appliance.
Do not, under any circumstances,
remove the Power supply cord ground
prow.
Such use may result in a fire, electrical
shock, or other Personal injury.
Converting a portable dishwasher
to a built-in
Your Whirlpool Portable Dishwasher can be
converted to a built-in (underoounter) model
by using conversion kit No. 4317656. The kit
is available at your Whirlpool dealer or
authorized Whirlpool service company.
Instructions are included with the kii.
17