Whirlpool 400 Series Use And Care Manual page 17

Disconnecting the dishwasher
1. Turn hot water off. (This can be done
after the last rinse.)
2. Press the red button on the connector to
release the water pressure.
3. Lift slightly on the hose connector while
pulling down the locking collar. Pull down
on the connector.
Locking collar
4. Empty any remaining water from the
connector by turning the connector
upside down.
5. Unplug power supply cord and return to
storage compartment.
6. Return hoses to storage compartment.
Hose connection
Electrical connection
A power supply of 120 volts, 60Hz AC, 15 or
20 amps, is required. For your personal
safety, this appliance must be grounded.
This appliance is equipped with a power
supply cord having a 3-prong grounding
plug. To minimize possible shock hazard it
must be plugged into a mating 3.prong
grounding type wall receptacle, grounded in
accordance with the National Electrical Code
and local codes and ordinances. If a mating
wall receptacle is not available, it is the
responsibility and obligation of the customer
to have a properly grounded 3-prong wall
receptacle installed by a qualified electrician.
Fire, Electrical Shock, and
Personal injury Hazard
An extension cord should not be used with
this appliance.
Do not, under any circumstances, remove
the power supply cord ground prong.
Such use may result in a fire, electrical
shock, or other personal injury.
&prong
grounding
I
Power supply
cord
3.pronb grounding
type wall receptacle
Do not, under any circumstances, remove
the power supply cord ground prqng.
Converting a portable dishwasher
to a built-in
Your Whirlpool Portable Dishwasher can be
is available at your Whirlpool dealer or
converted to
a
built-in (undercounter) model
authorized Whirlpool service company.
by using conversion kit No. 4317856. The kii
Instructions are included with the kit.
17