Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pyle Pure Clean SLPRWAS58
Summary of Contents for Pyle Pure Clean SLPRWAS58
- Page 1 YLQ27SC-130B SLPRWAS58...
- Page 2 SAVE THESE INSTRUCTIONS Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. Apart from the notes contained herein the general safety provisions and rules for the prevention of accidents of the legislator must be observed.
-
Page 3: Electric Components
Electric Components DANGER Risk of electric shock. Never touch the main plug and the socket with wet hands. Check the power cord with main Plug for damage prior to every use. Do not use the machine if the supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses, trigger gun. -
Page 4: Safe Handling
Safe Handling DANGER The user must use the appliance as intended. The person must consider the local conditions and must pay attention to other people in the vicinity when working with the appliance. Check important components, such as high pressure hose, hand spray gun and safety installations, for damage prior to every operation. -
Page 5: Other Risks
Other Risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: •Health defects resulting from vibration emission if the product is being used over long periods of time or not adequately managed and properly maintained. - Page 6 CAUTION Mind the weight of the appliance when selecting the storage location and during transport to prevent accidents or injuries. Several hours of continuous use of the appliance can lead to numbness in the hands in rare cases. →Wear gloves. →Keep hands warm.
-
Page 7: Personal Protective Equipment
Personal Protective Equipment CAUTION Wear protective clothing and safety goggles to protect against splash back containing water or dirt. During the use of high-pressure cleaners aerosols can develop. Inhaling aerosols can cause health damage. —Depending on the application, completely shielded nozzles (e.g. surface cleaner) that significantly reduce the emission of aqueous aerosols can be used for high-pressure cleaning. -
Page 8: Proper Use
Proper Use Use this pressure washer for private households only: If connection is made to a potable water system, the system shall be protected against backflow. This high pressure cleaner is designated with a rated input current. The intended use of this product covers the cleaning of vehicles, buildings, terraces, facades and garden equipment using clean water and biodegradable chemical detergents. -
Page 9: Technical Specifications
Technical Specifications 120V 〜 Voltage Frequency 60Hz Input Current Protection Class Double insulation Degree of protection IPX5 Rated pressure 1400PSI Max. permissible pressure 1900PSI Max. rate flow 1.76GPM Max. inlet pressure: 0.7MPa Weight 18.95 lbs. Assembly Mount loose parts delivered with appliance prior to start-up. 1. - Page 10 3. Slide the power cord hook into the right position of the unit. 4. Install the spray wand. • Fit the spray wand into the gun and rotate it until the two parts are completely locked. 5. Connect the high pressure hose to the trigger gun. •...
- Page 11 6. Connect the high-pressure hose to the water outlet. Connect the other end of the high-pressure hose to the water outlet on the washer and twist the black rotatable end-piece as indicated to secure the connection. 7. Connect the garden hose to the water inlet. Connect the garden hose adaptor (female coupler) to the water inlet of the pressure washer, and then thread your garden hose (male end) into the garden hose adaptor.
- Page 12 Start Up Park the appliance on an even surface. Insert the main plug into the socket. Water supply For connection values, see type plate. ATTENTION Impurities in the water can damage the high-pressure pump and the accessories. This high-pressure cleaner is suited to work with the YILI suction hose with backflow vale to draw in surface water from water butts or ponds.
-
Page 13: High Pressure Operation
High Pressure Operation CAUTION Keep a distance of at least 30 cm when using the jet for cleaning painted surfaces to avoid damage. CAUTION Make sure the switch is set to “OFF/ON” and insert the plug into a properly installed socket. ATTENTION •... -
Page 14: Operation With Detergent
Operation with Detergent Detergent can only be added when the device is operated in low pressure mode. DANGER When using detergents, the material data safety sheet issued by the detergent manufacturer must be adhered, especially the instructions regarding personal protective equipment. Remove the cap of the clean detergent bottle. - Page 15 Transportation CAUTION Risk of personal injury or damage! Mind the weight of the appliance during transport. When transporting by hand • Switch the product off and disconnect it from the water and power supply. • Pull out the transport handle until it audibly snaps into place. Attach transportation guards, if applicable.
-
Page 16: Frost Protection
Frost Protection ATTENTION Appliance and accessories that are not completely drained can be destroyed by frost. Completely drain appliance and accessories and protect them against frost. To avoid damage: • Detach the appliance from the water supply. • Detach spray lance from the trigger gun. •... - Page 17 Remove any dirt from the nozzle hole and rinse. ATTENTION • The sieve must not be damaged. • Pull the sieve out using flat pliers. • Clean the sieve under running water. • Reinsert the sieve into the water connection. Troubleshooting DANGER Risk of electric shock.
- Page 18 Symptom Cause Recommended action Machine refuses to start Plug in machine Machine not plugged in Try another socket. Defective socket Replace fuse. Switch off Fuse has blown other machines. Defective extension cord Try without the extension cord. Check the hoses and Fluctuating pressure Pump sucking air connections are airtight.
-
Page 19: Warranty
Accessories A choice of accessories is supplied in the scope of the delivery of this product. Please check the technical specification of any accessories that you purchase to ensure they are compatible with this product. Warranty 1. This product has been manufactured with high quality standard. The warranty period is 3 months from date of purchasing.