Using Pause - Whirlpool SM988PEP Use & Care Manual

Using PAUSE
For best results, some recipes call for stirring, turning, or adding ingredients dur-
ing cooking. Your microwave oven can be set to pause between COOK CYCLE1
and 2, or between either cycle and PROBE TEMP to give you time to stir or turn the
food, or to add ingredients, PAUSE cannot be added after QUICK DEFROST.
DO THIS...
1.
Put food in the oven and close
the door.
THIS HAPPENS...
2. Touch in desired cooking
instructions for COOK
CYCLE 1, (page 15).
The PAUSE Indicator Light will come
on and the Display will show the time
you selected for Cook Cycle 1.
4. Touch in desired cooking
instructions for COOK
CYCLE 2, (page 16).
5. Touch START.
BEEP BEEP
When COOK CYCLE 1 is over, 2 beeps
will sound and the oven will shut off.
The PAUSE and COOK CYCLE 2 Indi-
cator Lights will come on. The Display
will show the time set for COOK
CYCLE 2.
Open the door. Stir, turn or add ingre-
dients. Close the door.
Touch START to continue with COOK
CYCLE 2. The oven will remain off
until you touch START.
Adding "PAUSE"
PAUSE can be added to the cycle in operation, if there is to be another cycle,
-Touch PAUSE.
- Touch START.
The microwave oven will stop automatically after the cycle in operation. You
will hear 2 beeps. START must be touched to begin the next cycle after PAUSE.
If the final cycle has already started, PAUSE cannot be added. Open the oven
door to stop cooking; stir or turn food; close the door and touch START.