Plantronics Pulsar 590 Manual
Pairing with the anycom 200/250 usb bluetooth dongle
Hide thumbs
Also See for Pulsar 590:
- User manual (16 pages) ,
- Manual (9 pages) ,
- Specifications (2 pages)
Advertisement
Quick Links
Pairing the Plantronics Pulsar 590 Headset with the
Anycom 200/250 USB Bluetooth Dongle
These instructions are for Windows XP using the Anycom 200/250 dongles and
were developed using:
Anycom software (beta release used with this instruction) available at
anycom.com. Posted in "Add/remove programs":
The Plantronics Pulsar 590 v4.5 as of March 2, 2006,
Advertisement
Related Manuals for Plantronics Pulsar 590
Summary of Contents for Plantronics Pulsar 590
- Page 1 These instructions are for Windows XP using the Anycom 200/250 dongles and were developed using: Anycom software (beta release used with this instruction) available at anycom.com. Posted in “Add/remove programs”: The Plantronics Pulsar 590 v4.5 as of March 2, 2006,...
- Page 2 Pairing the Plantronics Pulsar 590 Headset with the Anycom 200/250 USB Bluetooth dongle Configuring the PC Bluetooth: If the “B” in the BT icon (located in the system tray) is , the BT dongle needs to be started: right click on the icon, left click to “Start the Bluetooth Device”...
- Page 3 Pairing the Plantronics Pulsar 590 Headset with the Anycom 200/250 USB Bluetooth dongle Choose “I know the service that I want to use...” Choose the “Headset” (A2DP is not listed explicitly)
- Page 4 Pairing the Plantronics Pulsar 590 Headset with the Anycom 200/250 USB Bluetooth dongle Put the Pulsar590 in pairing mode (switch on while pressing the talk button at the same time until flashing red/blue) The system will search for your headset (choosing “show audio devices” limits your search so that you don’t see other bluetooth devices)
- Page 5 Pairing the Plantronics Pulsar 590 Headset with the Anycom 200/250 USB Bluetooth dongle Click “Finish” Click “OK”...
- Page 6 Pairing the Plantronics Pulsar 590 Headset with the Anycom 200/250 USB Bluetooth dongle The icon in the tray will now have a green “B” (below) meaning that there is a bluetooth connection Double click on the green icon in your tray to see your connection (connected as “Stereo Headphones below)
- Page 7 Pairing the Plantronics Pulsar 590 Headset with the Anycom 200/250 USB Bluetooth dongle Some notes... Restoring a connection (You don’t need to go through “pairing” again unless you delete the pairing or want to use a different headset.) If you dropped your Bluetooth connection because: a.
- Page 8 Pairing the Plantronics Pulsar 590 Headset with the Anycom 200/250 USB Bluetooth dongle Using the headset icon, a. disconnect from the profile that is in use b. reconnect with the desired profile 3. When connecting via the “headset profile”, you will sometimes receive a visual and/or audio prompt (ringing) that you must answer to complete the connection.