Tension Straps Assemlby; Round Section Bottom Tracks Assembly - Cornelius NH Assembly Instructions Manual

Oval pools

Hide thumbs

Table Of Contents

Table of Contents

1) Study illustrations and chart carefully. You are now ready to as-

semble the metallic tension straps. Refer to indications on the chart

for the exact number of tension straps per row according to their

respective pool size.

2) Refer to Illustration 6.1: If there is more than one metallic

strap per row, assemble the straps together using 4 bolts and nuts

(BB) 1/4" #20 X 5/8" (6,35 mm X 15,88 mm), taking care of plac-

ing the bolt head on top.

3) Attach the assembled tension straps to the foot beams on both

sides, using four (4) standard screws ''Z''.

Chart

POOL SIZES

TENSION STRAPS QUANTITY (TOTAL)

ROWS TO ASSEMBLE

STRAPS PER ROW

ROUND SECTION BOTTOM TRACKS ASSEMBLY

Start with round section, refer to illustration 7.1 :

Place the end of the first round section bottom track on the foot

beam of the last buttress post of the straight section. Place the first

bottom plate of the round section, at the other end of the bottom

track.

Round section, refer to Illustration 7.2 :

Using the round section bottom tracks and the bottom plates, start

with the first plate of the round section. Repeat this procedure until

the half circle is completed.

Refer to Illustration 7.3. :

Before going to the next step, make sure that the centre of the pool

is properly squared and the metallic tension straps are straight with

no buckles.

Illustration 7.1

BOTTOM PLATE

ROUND SECTION