SECTION 7 - SERVICE ADJUSTMENTS
OVERVIEW
As mentioned in
"Section 2 - Software Requirements" on page
models in this manual utilize a "generic" type Main Board, therefore
certain service adjustments settings must be changed or confirmed
when either the Main Board, LCD Panel, or T-CON Board are
replaced.
UPDATING THE SOFTWARE
After replacing the Main Board, LCD Panel, or T-CON Board, you
MUST UPDATE the SOFTWARE to the latest version.
KDL-32EX725/40EX725/55EX725
ACCESSING SERVICE ADJUSTMENT
MODE
12, the
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY
Channel 5
Volume +
POWER
DISPLAY
5
VOLUME+
RM-YD062
POWER .
66