Overview Of The Grc-800 - Adcom GTP-602 Owner's Manual

2.1 GRC-820 Overview
The GRC-820 is designed specifically
for use with the GTP-602. We hope
you find the layout of the controls
simple to use. Note, there are also
controls for use with an ADCOM DVD
player, should you wish to utilize
our GDV-850 in your system with the
GTP-602. The following text provides
information on each functional area
of the the GRC-820.
The GRC-820 needs two AAA batteries
which are installed into the back of
the remote control. Alkaline batteries
are recommended for maximum oper-
ating life. When replacing batteries,
check that they have been put in cor-
rectly, as indicated on the base of the
battery compartment.
[ 18 ] Power Button
This button toggles the GTP-602
between the "on" mode and the
"stand-by" mode. Note, the rear
panel power switch on the GTP-602
must be in the on position for the
GRC-820 to control the GTP-602
[ 19 ] RDS Button
When listeing to FM radio stations
that broadcast RDS data, the RDS
button displays the information made
available using the Remote Data
System on the front panel of the GTP-
602. This information can be the for-
mat of the radio station or song spe-
cific. The information you will receive
is determined by the broadcaster.
[ 20 ] Tuner Presets
These buttons provide direct access
to both FM and AM presets that are
programmed into the GTP-602.
[ 21 ] Scan Button
This button engages the scan funtion
which provides a brief listeing pre-
view to all the preset staions. Press
the button again to end the function.
[ 22 ] Bass and Treble
These buttons provide access to the
bass and treble adjustments. The
adjustment range is from +8dB to
+10dB.
[ 23 ] Bypass
The bypass button provides a more
direct signal path that reroutes the
audio signal around the bass and
treble adjustment circuits, thus pro-
viding a cleaner sound. The bass and
treble functions are not in the circuit
when the bypass mode is engaged.
[ 24 ] Balance Control
This control moves the center image
between the left and right speakers
and can be used to correct for center
image localization.
[ 25 ] DVD Player Control
These buttons provide control for an
ADCOM DVD player such as the GDV-850.
[ 26 ] Volume Up
This button increases the level of the
sound you hear from your system.
[ 27 ] Volume Down
This button decreases the level of the
sound you hear from your system.
[ 28 ] Mute
This button "turns off" the sound com-
ing from your system. Push the button
a second time to restore the previous
level.
[ 29 ] Tune Up
This button is used to change the radio
station. It functions in both the preset
mode and the tune mode.
[ 30 ] Tune Down
This button is used to change the radio
station. It functions in both the preset
mode and the tune mode.
[ 31 ] AM/FM
This button toggles the tuner between
the FM and AM setting.
[ 32 ] FM mode
The FM mode button toggles the GTP-
602 between the stereo and mono
reception mode while listening to FM
radio.
[ 33 ] Tune/Preset
This button toggles the tuner between
the direct tuning and the preset sta-
tion mode.
[ 34 ] Memory
This button is used to store tuner presets.
[ 35 ] Sources
These buttons are used to select the
device to which you would like to listen.