Microtek Medi-2200 Plus User Manual page 27

C. Using the Intraoral X-Ray Film Holder
To scan intraoral dental films, use the Intraoral X-Ray Film Holder, which can hold
up to three Size 0, three Size 1, six Size 2, two Size 3 and one Sise 4 films at a
time.
1. Make sure that the Black Mat is removed from the digitizer lid.
2. Place the Intraoral X-Ray Film Holder on the digitizer glass surface. Make
sure to orient the film holder with the "Microtek" logo facing up.
U-shaped edge
Size 4 Size 3
Important: Align the holder's top
corners (left and right) of the
U-shaped edge firmly against the
top edge of the glass surface.
Size 0
When placing the film holder,
make sure that the Calibration
window on the glass surface is
Size 1
kept clear and free of obstruction
at all times.
Size 2
3. Place the Size 0, 1, 2, 3 or 4 film to
be scanned inside the individual frame
of the film holder, with the correct side
up. Then, lower down the digitizer lid.
Note that the red arrow
marks on both the film
holder and digitizer's top
ruler are pointing to each
other.
Calibration window
Microtek logo
Medi-2200 Plus User's Manual 27