Whirlpool LE7010XS Use & Care Manual page 5

I I'
1
. Select a CYCLE
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
3
. Push the START Button
The dryer will start tumbling when you
push the START Button.
If the START Button is pushed when the
Cycle Control Knob is pointing to an
OFF area, the End-of-Cycle Signal will
sound. Dryer will not start
2
Set
. TEMPERATURE SELECTOR
The Temperature Selector can be set
on any desired temperature or any-
where between 2 temperatures.
To stop and restart
the dryer
To stop the dryer, open the door (or
turn the Control Knob to OFF),
To restart the dryer, close the door,
select
CyCle,
if necessary, and push
START.
The Cycle Control Knob should point to an OFF area when the dryer is
not in use. If the dryer is stopped before the cycle is finished, turn the Cycle
Control Knob to an OFF area.
5