Door Swing; Door Adjustments - U-Line UHBV024 Quick Start Manual

QUICK START GUIDE
16-1/2"
90°

Door Swing

Door Swing
2175R(F) & 2275WC Models
Wall
1/4" Min.
(6 mm)
90°
Door Swing
Integrated Stainless Steel, Black and White
2175BEV
Units have a zero clearance for the door to open 90
Wall
1/4" Min.
installed adjacent to cabinets.
(6 mm)
Stainless steel models require 2-1/8" (54 mm) door
clearance to accommodate the handle if installed next to a
21"
wall.

Door Adjustments

HINGE COVER
25-1/2"
90°
Hinge cover included with the literature bag is optional.
Door Swing
To install hinge cover:
Wood Overlay
1. Press hinge cover squarely over hinge.
2175WC Models
Wall
1/4" Min.
(6 mm)
DOOR ALIGNMENT AND ADJUSTMENT
90°
Align and adjust the door if it is not level or is not sealing
Door Swing
properly. If the door is not sealed, the unit may not cool
properly, or excessive frost may form in the interior.
16-1/2"
90°
Stainless Steel
Wall
2-1/8" Min.
(54 mm)
90°
Wall
2-1/8" Min.
(54 mm)
21"
25-1/2"
90°
Stainless Steel
Hinge Cover
Wall
2-1/8" Min.
(54 mm)
90°
Stainless Steel
NOTICE
Properly aligned, the door's gasket should be
firmly in contact with the cabinet all the way
around the door (no gaps). Carefully examine
the door's gasket to ensure that it is firmly in
contact with the cabinet. Also make sure the
door gasket is not pinched on the hinge side of
the door.
To align and adjust the door:
1. Gently pry off hinge cover from top of unit.
2. Loosen (do not remove) top and bottom hinge screws
using a Torx T-25 screwdriver.
3. Align door squarely with cabinet.
4. Make sure gasket is firmly in contact with cabinet all
o
, when
the way around the door (no gaps).
5. Tighten bottom hinge screws.
6. Tighten top hinge screws and replace hinge cover.
REVERSING THE DOOR
Location of the unit may make it desirable to mount the
door on the opposite side of the cabinet.
The hinge hardware will be removed and reinstalled on the
opposite side of the cabinet.
TO REVERSE THE DOOR
6
u-line.com