Electra Elite IPK II
Description
If a trunk has Dial Tone Detection enabled, the system monitors for dial tone from the Telco or PBX
when a user places a call on that trunk. If the user accesses the trunk directly (by pressing a line key or
dialing #9 and the trunk's number), the system will drop the trunk if dial tone does not occur. If the user
access the trunk via a Trunk Group (by dialing a trunk group code or automatically through a feature like
Last Number Redial), the system can drop the trunk or optionally skip to the next trunk in the group.
Refer to the chart under Programming for more information.
Conditions
None
Default Setting
Disabled for manually dialed calls; enabled for automatically dialed calls.
System Availability
Terminals
All Stations
Required Component(s)
None
Dial Tone Detection
Document Revision 1
Dial Tone Detection
2 - 267