Assistance Or Service - Whirlpool 3HLER5437JQ0 Use And Care Manual

Odors
Have you recently been painting, staining or varnishing in
the area where your dryer is located?
If so, ventilate the area. When the odors or fumes are gone
from the area, re-wash and dry the clothing.
If the dryer is electric, is it being used for the first time?
The new electric heating element may have an odor. The odor
will be gone after the first cycle.
If the dryer is gas, there may be a gas leak.
Turn off the gas supply line, leave your house, and then call
your local gas company.
Garment damage
Check the following:
Were zippers, snaps, and hooks left open?
Were strings and sashes tied to prevent tangling?
Were care label instructions followed?
Were items damaged before drying?
12

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check
"Troubleshooting." If you still need help, follow the instructions
below.
If you need replacement parts
If you need to order replacement parts, we recommend that you
®
only use FSP factory specified parts. These parts will fit right
and work right because they are made with the same precision
used to build every new WHIRLPOOL
replacement parts in your area, call the dealer from whom you
purchased the dryer or a Whirlpool designated service company.
NOTE: For gas dryers only, if the power supply cord is
damaged, it must be replaced by a special cord available from
the dealer from whom you purchased the dryer or a Whirlpool
designated service company.
For warranty information
Contact the dealer from whom you purchased your dryer.
®
appliance. To locate FSP